Spare parts & Accessory

Bags of 40 pieces of Biscuits for wood joints with differnt dimension: n.0, n.10 and n.20

(Cod: DMAC084)

Belt for Area 254/305

(Cod: DMACTF260)

Planer shaft belt Area 254/305

(Cod: DMACTF994)

Engine belt for Area 254/305

(Cod: DMACTF995)

MT2 fixed bit for MC 1200

(Cod: DMACT120)

Planer knives area 254

(Cod: DMAC166)

Saw blade tape 10mm, development 2240 mm

(Cod: DMAC064)

Magnetic gauges for planer knives alignment

(Cod: DMAC875)

Meta wheel disc 1

(Cod: DMAC176)

Meta wheel disc 2

(Cod: DMRI041)

Saw blade tape 12mm, development 2240 mm

(Cod: DMAC065)

Hose for dust collector Ø 100 mm

(Cod: DMAC001)

Blade with 10 mm thickness and development of 3290 mm

(Cod: DMAC125)

Rotary tailstock MT2 for MC 1200

(Cod: DMACT121)

Planer knives area 305

(Cod: DMAC197)

Widia Circular blade suitable for cutting wood with diameter of 400 mm and 30 teeth

(Cod: DMACSC12)

Saw blade tape 16mm, development 2240 mm

(Cod: DMAC040)

Woodworking Circular Saw Ø 200 mm and 20 teeth

(Cod: DMACSC10)

Circular blade Z20 / 200 Ø 200 mm

(Cod: DMAC205)

Saw blade tape 20mm, development 2240 mm

(Cod: DMAC066)

Woodworking Circular Saw Ø 200 mm and 40 teeth

(Cod: DMAC112)

Widia Circular blade suitable for cutting wood with diameter of 250 mm and 20 teeth

(Cod: DMACSC1)

Widia Circular blade suitable for cutting wood with diameter of 250 mm and 40 teeth

(Cod: DMACSC2)

Saw blade tape 16mm, development 4800 mm

(Cod: DMAC096)

Adaptar cone 16 mm Ø 6 for universal router bits with stem 6 mm

(Cod: DMAC016)

Adaptar cone 16 mm Ø 8 for universal router bits with stem 8 mm

(Cod: DMAC076)

Widia Circular blade suitable for cutting wood with diameter of 250 mm and 60 teeth

(Cod: DMACSC3)

Two woodworking blades for surface & thickness planer Cosmos with length 154 mm

(Cod: DMRI485)

Saw blade tape 20mm, development 4800 mm

(Cod: DMAC097)

Flat tooth (LFZ). Equipped with spacer rings. For cutting veneer and laminate on both sides, MDF and chipboard

(Cod: DMRI442)

Widia Circular blade suitable for cutting wood with diameter of 250 mm and 80 teeth

(Cod: DMACSC4)

Driver support plate

(Cod: DMRI037)

Woodworking Circular Saw Ø 200 mm and 60 teeth

(Cod: DMACSC16)

Saw blade tape 32mm, development 4080 mm

(Cod: DMAC094)

Saw blade tape 25mm, development 4800 mm

(Cod: DMAC098)

Blade with alternating tooth (WZ). Excellent for long and cross grain cutting of soft, hard and exotic woods, chipboards and honeycomb boards, veneered and laminated panels on one side

(Cod: DMACSC21DA)

In the box there are three planer knives with length of 260 mm

(Cod: DMRI033)

In the box there are three planer knives with length of 250 mm - Voyager

(Cod: DMRI527)

Pack consists of 12 universal milling shank 6 mm

(Cod: DMAC022)

Circular blade for wood di type Widia with a diameter 315 mm and 60 teeths

(Cod: DMACSC7)

Saw blade tape 32mm, development 4800 mm

(Cod: DMAC099)

(Cod: DMUT010)

Circular blade for wood type Widia with a diameter 350 mm and 72 teeths

(Cod: DMAC450)

Kit of 12 gouges for wood lathes

(Cod: DMAC044_1)

Widia Circular blade suitable for cutting wood with diameter of 700 mm and 42 teeth

(Cod: DMACSC15)

Circular blade for wood di type widia with a diameter 315 mm and 80 teeths

(Cod: DMACSC8)

Alternate tooth (WZ). They are used on table saws and miter saws. Ideal for cutting chipboard panels also in packs. For an excellent finish in cross-cutting of hard and exotic woods, veneered panels, laminated on one side and MDF. Medium finish on formica and PVC. Silent and anti-hiss thanks to the special geometry of the silencing cuts produced by the laser cutting on the blade body

(Cod: DMACSM14)

Alternate tooth (WZ). They are used on table saws and miter saws. Ideal for cutting chipboard panels Silent and anti-noise thanks to the special geometry of the silencing cuts produced by laser cutting on the blade body. For an excellent finish in cross-cutting of hard and exotic woods, veneered and laminated panels on one side.

(Cod: DMACTF288)

KIT 10 CANDLE CUTTERS WITH 2 CUTTERS

(Cod: DMACTF988)

Set Replacement knife plate for profistar 310 and 410 ( 10 pieces)

(Cod: DMACTF315)

Blade saw 5070 mm 25X0.65 t3 carbon

(Cod: DMACSN700)

Mortising bits set chuck capacity of 16 mm - right rotation

(Cod: DMAC060)

(Cod: DMUT006)

KIT 10 CANDLE CUTTERS WITH 4 CUTTERS COATED WITH TIN

(Cod: DMACTF993)

Spindle Moulder Cutter Head 50

(Cod: DMAC067)

Circular blade type Widia for wood with 315 mm diameter and 72 teeth

(Cod: DMACSC24)

In the box there are three planer knives with length of 410 mm

(Cod: DMRI036)

Fixed carriage of 1500 mm for toupie,voyager,sc1

(Cod: DMAC1500)

In the box there are three planer knives with length of 360 mm

(Cod: DMRI035)

Kit of three planer knives with length of 310 mm

(Cod: DMRI034)

Wheels kit moving machine

(Cod: DMAC055)

Woodworking Circular Saw Ø 200 mm and 80 teeth

(Cod: DMACSC22)

(Cod: DMRI044)

Wheels for FSC Profistar 310-410, spindle moulder Wagon 1000 and Sb 108

(Cod: DMAC055P)

Wheels kit moving machine

(Cod: DMB-01)

Wheels kit moving machine

(Cod: DMB-02)

Wheels kit moving machine

(Cod: DMB-03)

SPECIAL SCORING BLADE

(Cod: DMACTF329)

Wheels kit moving machine

(Cod: DMACSN005)

Saw Blade Z34/400 Ø 400 mm

(Cod: DMACSC34)

Case of cutters for wood with a 50mm Ø cutter head and 7 pairs of toupee knives

(Cod: DMAC024)

Box equipped with one profile cutter head and 7 profiles

(Cod: DMAC030)

Box equipped with one profile cutter head of Ø 100 and 7 profiles

(Cod: DMAC059)

Circular blade for wood type Widia with a diameter 315 mm and 40 teeths

(Cod: DMACSC6)

Planner blade 530 mm 13%

(Cod: DMAC207)

Saw Blade Z48/400 Ø 400 mm

(Cod: DMACSM010)

Saw Blade Z60/400 Ø 400 mm

(Cod: DMACTF324)

Planner blade 630 mm 13%

(Cod: DMAC207-1)

Rekord 630 spiral cutterblock

(Cod: DMACTFA630)